Home | Contact Us | Enquiry

Prism Gas Detection Pvt. Ltd.

Trusted Member at ExportersIndia.com

Products

Online Gas Detection System (K-60)

Features

Small and lightweight, one piece design of an alarm and sensor unit.A sensor can be installed separately.(option)
Battery unit allows use in a site under construction.(option)Equipped with a low battery alarm.
2-stage alarm to manage oxygen deficiency stepwise.
Peak hold function to check both the highest the lowest oxygen concentrations.

Application

Clean rooms for semiconductor factory
Various test rooms

Also suitable for use in oxygen deficiency hazard area for continuous monitoring of oxygen concentration and for safety ensuring during construction.

Specifications

Model	KS-60
Gas Detected	Oxygen
Detection Range	0-25.0vol%, or 0-50.0vol%
Gas concentration Indication	LCD digital(0.1vol%resolution)
Alarm Set Value	1st stage: 19.0vol%, 2nd stage: 18.0vol% (factory defaults)
Alarm Indication	Gas alarm (1st / 2nd stage); Red LED flashing (AL1/Al2) Intermittent buzzer (when the buzzer is on)
External Output	Gas concentration analog output : 4-20mA DC Gas alarm contact (for 1st / 2nd stage) : 1a
Operating Temperature/Humidity	0^oC to 40^oC, 30-85%RH
Power Source	24V DC + 10%
Power Consumption	Approx. 2 W
Dimensions	W82 x H154 x D30mm (excluding protrusions)
Weight	Approx. 500g
Installation	Wall mount
Exterior Color	Munsell N7.0
Other function	Peak hold, Maintenance mode, Low battery alarm (when using the battery unit)