Please Install Flash Player
Download from here
Combustible Gas Detectors (XP-311αA )
|
|
|
Specifications
| Model | XP 311± A | | Detection Principle | Catalytic Combustion sensor | | Minimum Detectable Leak Rate | 0.5%LEL. | | Measuring Range | 0 to 10% and 0 to 100% LEL | | Calibrating Gas | LPG (iso-butane) or methane. Calibration for other specific gases is available on request. | | Accuracy | + 5% of full scale reading | | Response Time | Within 3 seconds (90% of final readind). | | Alarm Style and Preset Point | Intermittent tone and flashing lamp 20% LEL. preset, but available at other point on request.( not in XP 311). | | Operating Temperature | -20o to +50o (-4oF to + 122oF). | | Power Source | Size AA dry cell batteries (1.5 V x 4 pcs). | | Battery Life | 100 intermittent tests of 3 minutes duration each or 4 hours for continous operation using dry cell batteries. | | Dimentions | 190 mm x 84 mm x 40 mm. | | Weight | 700 gr. (1.5 lbs.). | | Standard Accessories | Non-conductive probe with filter/ moisture trap. 1 meter long sampling hose. Carrying case with shoulder strap. Set of four size AA dry cell batteries. Two filter elements. | | Optional Accessaries | Sampling tube 5 m long or as required. Floating Probe with float and filter / moisture trap. Telescopic probe. Flexible probe. Remote alarm signal unit (BEZ -1) with 10m long cable. |
|
| |
|
|